Zenith

The best way to reduce noise pollution of jaw crusher

Time: 2018-10-17

The best way to reduce the noise pollution of the jaw crusher is that the size of the spiral cone of the crusher is large, and the worker is difficult to process, and some errors will occur during the processing. The spiral cone hammer gear of the crusher, the horizontal rotating shaft, the eccentric sleeve and the main shaft have great deviations during the installation process. The production environment of the crusher is relatively bad, which will cause the gear to sway in the tooth and increase the friction. The eccentric sleeve and the horizontal axis of rotation will rotate unbalanced. The jaw crusher is commonly known as smashed, also known as the tiger's mouth. The crushing chamber is composed of two jaws, which are composed of two jaws, which simulate the two movements of the animal to complete the crushing operation of the material crushing operation.

Shanghai ZENITH Crusher is mainly used as coarse crusher and medium crusher in mining, building materials and infrastructure. According to the width of the feed port, it is divided into three types: large, medium and small. The feed port width is larger than 600MM for large machines. The feed port width is 300-600MM for medium-sized machines. The feed port width is less than 300mm for small-sized machines. Machine, the highest compressive strength of the crushed material is 320Mpa. The jaw crusher is simple in structure, easy to manufacture and reliable in operation. The working part of the jaw crusher is two jaws, one is a fixed jaw (fixed), the vertical (or the upper end is slightly inclined) fixed on the front wall of the body, and the other is the movable jaw (moving), the position Tilting, forming a large and small crushing cavity (working cavity) with the fixed jaw. The movable jaws periodically reciprocate against the fixed jaws, sometimes separated and sometimes close. When separated, the material enters the crushing chamber, and the finished product is discharged from the lower portion; when it is close, the material between the two jaws is crushed by bending, bending and splitting. 

Other Recommended Information

The best way to reduce the noise pollution of the jaw crusher is that the size of the spiral cone of the crusher is large, and the worker is difficult

The structure of the jaw crusher can be composed of a fixed body, a rotating body, an adjusting device, a safety device and the like. The main compone

As one of the advanced breaking machines of the current crushing technology, the mobile jaw crusher has a very large improvement in the stability and work effic

Jaw crusher plays a very important role in the stone production line. It is the main crushing equipment in the stone production line configuration, be

Jaw crusher is widely used in industrial and mining enterprises , this is because the aircraft structure is relatively simple , and has a large range

With the development of the crushing industry under the influence of industry, the E-breaking machine represented by semi-mobile crushing has been warmly welcom

Maybe you are interested in the following information?

More Material Solutions