24/7 Online Technical Support for You
As the basic material of engineering construction, sand aggregate is commonly used as cobblestone, granite, limestone, etc. The raw materials are different, and the required crushing equipment is also different.
In the process of processing, appropriate processing equipment should be selected according to different raw materials.
First of all, raw materials can be divided into two categories according to the hardness: hard stone and soft stone.
Hard stone: pebbles, granite, basalt, etc., hardness: 150Mpa or more.
Treatment method: The crushing equipment is usually selected from jaw crusher and cone crusher. It can be shaped according to the requirements of the finished product, and then used by the impact crusher (sand making machine) for shaping. Then, the auxiliary equipment vibrating screen is used for sorting, and the broken The materials are sorted into finished aggregates of various specifications.
Soft stone: limestone, sandstone, etc., hardness below 150Mpa.
Treatment method: The crushing equipment can be considered to use a jaw crusher, a counter crusher, a heavy hammer crusher, or an impact crusher (sand sander) can be used as needed. Important note: Limestone varies greatly in hardness depending on its silicon content. If limestone with high silicon content is used, a cone crusher is required for crushing.
There are many ways to select the sandstone aggregate processing equipment and process design. The specific requirements and choices need to be considered according to the hardness, looseness, mud content, finished product requirements and other factors of different raw materials. When assigning solutions to customers, we will go to the site to configure the appropriate equipment according to the material conditions, so that you have no worries in the production process.
leave your message here, we'll send you
an Email immediately.