24/7 Online Technical Support for You
In recent years, with the increasing demand of aggregate, crusher applications are increasingly widespread, the apparatus commonly used in the cement production line, the field of aggregate production line, production line construction waste like brick, its major facilitatorloss member hammer crusher, impact plate and other accessories consumption increases.
Wearing parts of the crusher plate has a hammer impact crusher, impact crusher liner, the steel impact crusher, impact crusher and other compression block, accessories by high manganese steel, high chromium, high wear-resistant composite materials Meng casting orforged.
Crusher is a very large drawback hammer and the impact plate particularly easy to wear, especially ore crushing hard, wear is more serious, requires frequent replacement.Thus, consumption Crusher hammer back plate and account for a significant portion of the sand production line post-operating costs.
Hammer worn to a certain extent should be promptly adjusted or replaced to avoid damage to the other fastener member.
The procedure for replacing the hammer
1, demolition hammer plate:
First, with special shelves flip open the device, to facilitate later work, the rotation of the rotor by hand, the need to replace the hammer to the position of the access door, and the rotor is fixed, remove the hammer plate positioning parts, and thenpressing axially split out, and then the hammer in the axial direction out of the access door, or hanging from racks.For easy removal of the hammer can hammer tapping the plate on a hand hammer.
2, hammer mounting plate:
When hammer mounting plate, the above-described process can be reversed, according to the correct procedure for demolition hammer, downtime can be saved, thereby also improving the efficiency of the crusher, but also will bring to the enterpriseconsiderable economic benefits.Meanwhile crusher liner and the crushing gap between the rotor and the counter-plate will also affect the production capacity of the crusher.