180-250TPH Limestone Portable Crushing Plant
Material: cement mine skin limestone
Output Size: 0-10-20-30mm
Application: for mixing station
The material is fed by the vibrating feeder firstly, and a part of the soil can be screened out in advance. After crushing by jaw crusher, the stone is sifted by the vibration screen, and then into impact crusher with three chambers. Finally, the crushed stone is sent into the vibrating screen for screening again where 3 kinds of finished products (0-5-20-30mm) are discharged.
The design of portable crushing plant is simple and reasonable, which greatly reduces the use of hopper bin, the failure rate in the later stage, and the investment cost.
KE750-1 Portable Jaw Crushing Plant adopts TSW1139 Feeder. So the crushing efficiency of the whole equipment is higher and the output is larger than others on the market.
KF1315-2 Portable Impact Crushing Plant is convenient to adjust and easy to maintain. There are three counterattack plates. So the yield can greatly increase, and the pebble grain type can be better.
The construction cycle of portable crushing plant is short. It is suitable for the expressway and high-speed railway construction, the real estate industry as well as the mixing plants.
The portable crusher was finally chosen after careful comparisons. Since operation, it has been high-yield and stable, attracting many customers nearby.Video Center
Input Size:Below 720mm
Output Size:0-5mm, 5-10mm, 10-20mm, (Oman standard)
Input Size:Below 700mm
Output Size:0-5mm, 40-70mm (0-5mm, 5-10mm, 10-20mm)
Input Size:Below 1000mm
Output Size:0-10mm, 10-13mm, 13-20mm, 20-25mm
Capacity:400-500TPH (12 hours per day)
Input Size:Below 210mm