This European Series Hammer Crusher is widely used in metallurgy, mining, chemical, cement, construction, industrial and mining industries, and used in medium and fine crusher. The compressive strength is not over 320Mpa.
This hammer crusher is mainly component of casing, rotor, hammers and bars. The case is divided into two parts: up and down, which is connected by welding the cut steel; other parts are connected by screws. The one inside of case is high manganese steel lining board, which is easy to change when wore out. There are several hammers in the spindle, which make up of rotor together with turntable and wear hammer shaft. It works through motor and V-belt to drive spindle and rotor rotating, so that centrifugal force producing by the hammer rotating spread out. Then when the big material was put into crushing chamber, it was crush by the high speed hammer. Afer those process, the standard material was screen out by down bar and non-standard one was left on the crushing chamber and crush again. In order to avoid clogging, humidity of crushed material should below 10%-15%.

Model	HM4008-75	HM4012-90	HM4015-132
Rotor Diameter (mm)	750	900	1150
Rotor Length (mm)	800	1200	1500
Rotor Speed (r/min)	800-1000	800-1000	550-800
Inlet size (mm)	320×930	400×1200	500×1500
Max. Feeding Size (mm)	<30	<40	<50
Outlet Size (mm)	0-3	0-3	0-8
Capacity (t/h)	8-15	15-35	40-70
Power (KW)	75	90	132
Overall Dimension (mm)	2310*1665*1610	2840*2100*2020	3720*2650*2540

If you have any questions, please write it down, we will reply to you within 24 hours!

 

Your Name:	*
Contact Tel:	*
E-mail:	*
Your Country:	*
Company:	(Optional)
Application:	For Construction (like concrete, highway, railway, brick, building, etc)
	For Mining ( like gold, copper, Iron ore beneficiation or nonmetal beneficiation, etc)
Equipment:	Crusher Ball Mill Other mills Feeder Conveyor Screen Beneficiation Equipments
Detailed Requirements:	*
	(like raw materials name, capacity in TPH, output size like 0-10,10-15, 15-20 mm for crushing or 75 microns ( 200 meshes) for mill machine and other requirements)