Barite Processing Plant

The main component of barite is barium sulfate, which is mostly dense block or plate-like, granular aggregate. It is colorless and transparent when it is pure. It is dyed into various colors when it contains impurities. The streaks are white, the glass is shiny, and the transparency is translucent.Barite is widely used in chemical, light industry, building materials, glass and other industrial fields. It can be used as a cosolvent for glass production, as a filler for paints, rubber, plastics, etc., with the rapid development of the industrial field.The prospect of the use of barite will be more and more broad.

The barite jaw crusher is powered by an electric motor. The eccentric shaft is driven by a V-belt and a sheave by a motor pulley, so that the movable cymbal reciprocates according to a predetermined trajectory, thereby entering the fixed raft, the movable raft and the side.The material in the crushing chamber composed of the guard plate is broken, and the finished material is discharged through the lower discharge port.

The crushing method of the series jaw crusher is a curved extrusion type. The motor drives the belt and the pulley. The eccentric shaft moves the moving jaw up and down. When the moving jaw rises, the angle between the bracket and the moving jaw becomes larger, thus pushing the moving jaw.The plate approaches the fixed slab, and at the same time the material is crushed, smashed, crushed, etc.; when the moving squat descends, the angle between the bracket and the moving raft becomes smaller, and the moving slab leaves under the action of the tie rod and the spring.The boring plate is fixed, and the crushed material is discharged from the lower mouth of the crushing chamber at this time, and the batch is crushed and discharged as the motor continuously rotates and crushes, thereby realizing mass production.

When the barite Raymond mill works, the material to be pulverized is fed into the machine from the feeding hopper on the side of the hood, and revolves around the vertical axis by the grinding roller device suspended on the main stand of the main machine, while rotating itself.Due to the centrifugal force during rotation, the grinding roller swings outward and presses against the grinding ring, so that the blade shovel the material between the grinding roller and the grinding ring, and the purpose of pulverizing the material is achieved by rolling rolling of the grinding roller.Wind selection process: After the material is ground, the fan blows the wind into the main casing, blows up the powder, and sorts it through the analyzer placed above the grinding chamber. The coarse and coarse material falls into the grinding chamber and re-grinds.The airflow entering the cyclone collector conforms to the specification, and is collected and discharged through the powder outlet, which is the finished product.The wind flow is returned to the fan by the return air pipe at the upper end of the large cyclone collector. The air path is circulated and flows under the negative pressure state. The increased air volume of the circulating air path is partially discharged through the exhaust pipe between the fan and the main engine, and enters the small cyclone collection.

Advantages of the barite Raymond mill:

1. Three-dimensional structure, small footprint and strong set;

2. The fineness of the finished powder is uniform;

3. the transmission is stable and reliable operation;

4. The whole machine has high wear resistance and long service life;

5. centralized control, basically can achieve unmanned work.

Related Blogs

Customize Your Own Crushing Plant Now

Fill your requirements here, and we'll send the custmized solution and quotation to you by the reserved contact information.

*
*
* WhatsApp
*
X